0.5mm - 1.5mm Filter End Caps Fingerprint Resistant

0.5MM-1.5MM Fingerprint Resistant Filter Cartridge Upper And Lower Covers

1. Product Description

A cover, cover, or roof used to close or cover the end or top of a container, box, or structure section. The first layer of wood or waterproof material on the outer wall of a wooden house or on the roof of a wooden house. Upper cover plate used in NC drilling of printed circuit board. The main function of cover plate is to improve the drilling quality and improve the yield. It is an indispensable plate in the NC drilling process of printed circuit board.

2. Specifications

There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.

3. Product advantage

25 years' experience in producing filter end caps.
2. Accurate size according to customer requirements
3. Ensure the filters have a longer life with excellent heat and chemical resistance.
4. Effectively improve the capacity of the filter material.
5. Various exist mold to save your cost.
6. Qualified raw materials with certifications to make the filter caps.

4.Service

we can provide a free sample with our catalog. But the courier charge will on your side. We'll send back the courier charge if you make an order.

4. Characteristics

Materials: galvanized steel, stainless steel, fingerprint proof, copper / brass, etc
Thickness 0.30 mm to 3.00 mm
Outer diameter 20.00 mm to 1000 mm
Type on / off, with / without holes, customized
Delivery time according to customer requirements
Packaging plastic bag / piece or customized
It is used in dust catcher, air filter, fuel filter, oil filter, air compressor, water filter, activated carbon filter, etc.
Provide OEM
Quality control ISO certification
After sales service, product testing report, online tracking.

5. Product application

The function of the cover of the air filter element is to keep the dust from entering the engine directly. The function of the air filter element is: The engine should absorb a large amount of air in the process of working, if the air is not filtered, dust suspended in the air is sucked into the cylinder, which speeds up the wear and tear of the Piston Assembly and the cylinder. Large particles entering between the Piston and cylinder can cause serious “Cylinder pulling”, especially in dry, sandy working conditions. The air filter is mounted in front of the carburetor or intake pipe, it acts as a filter for dust and sand particles in the air, ensuring that the cylinder is filled with sufficient, clean air. 3 of the thousands of parts and components of the car, the air filter is a very unremarkable part, because it is not directly related to the technical performance of the car, but in the actual use of the car, the air filter has a great impact on the life of the car (especially the engine) . On the one hand, if there is no filtering effect of air filter, the engine will inhale a large number of dust, particles of air, resulting in serious wear and tear of the engine cylinder; on the other hand, if in use, long time without maintenance, the filter element of the air filter will stick to the dust in the air, which will not only reduce the filtering ability, but also hinder the air circulation, causing the mixture to become too thick and the engine to work abnormally. Therefore, regular maintenance of the air filter is crucial.

6. Packing method

The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

0.5mm air filter covers

1.5mm filter end caps

filter end caps fingerprint resistant

0.5mm - 1.5mm Filter End Caps Fingerprint Resistant Images